To activate Night View Assist Plus using the steering wheel in a Mercedes-Benz vehicle, you generally follow a straightforward process. This system is designed to help improve visibility during nighttime driving by using infrared cameras to display a clear image of the road ahead, including pedestrians, animals, and other obstacles that may not be visible with headlights alone.

Here’s a step-by-step guide to activating Night View Assist Plus using the steering wheel:

1. Ensure the System is Installed and Functional

• Night View Assist Plus may not be available in all models, so make sure your vehicle is equipped with this system. It is typically available on high-end models like the S-Class, E-Class, and some AMG variants.
• Check that the system is working properly, and the cameras and sensors are clean and unobstructed.

2. Start the Vehicle

• Make sure your vehicle is in "Drive" or "Park" mode and the engine is running.

3. Locate the Button on the Steering Wheel

• On most Mercedes-Benz vehicles equipped with Night View Assist Plus, you can activate the system directly through the steering wheel control buttons.
• Look for a button or dial that typically features an image of headlights or a night vision icon. This button might be located on the left or right side of the wheel, depending on your model. It is often near the other drive-assist functions such as cruise control or lane-keeping assist.

4. Activate the System

• Press the Night View Assist Plus button on the steering wheel. Once activated, the system will display the infrared image on the MBUX infotainment screen or instrument cluster, depending on your vehicle's configuration.
• The system will begin displaying a black-and-white image of the road ahead, highlighting pedestrians, animals, or other hazards that are outside the range of your headlights.

5. Adjust Settings (if applicable)

• Some vehicles allow you to adjust the intensity or the specific settings for Night View Assist Plus. If your steering wheel has a dynamic control knob or buttons for vehicle settings (often near the instrument cluster or on the infotainment screen), you can fine-tune the settings to your preference.

6. Deactivating the System

• To turn off Night View Assist Plus, you can press the same button on the steering wheel again or turn off the system through the infotainment menu if needed.

Notes:

• Night View Assist Plus can automatically activate when you drive at night or in low-light conditions, but the steering wheel button provides manual control for the driver to activate or deactivate it as needed.
• The system uses infrared technology, and the clarity of the image may vary depending on ambient lighting and the presence of objects on the road.

By following these steps, you can ensure better visibility and safety during nighttime driving with Night View Assist Plus activated directly through your steering wheel controls.